|
Zhuzhou Mingri Cemented Carbide Co., Ltd.
|
Gold Index: 8266
12 ~ 250mm x 2 ~ 4.5mm Tungsten Carbide Round Cutters for Wood Cutting
| Place of Origin: | Guangdong, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Φ12 ~ 250mm x 2 ~ 4.5mm Tungsten Carbide Round Cutters for Wood Cutting
Description:
Φ12 ~ 250mm x 2 ~ 4.5mm Tungsten Carbide Round Cutters for Wood Cutting
Description:
Tungsten carbide disc cutter is supplied in a range of standard sizes for wood and steel-sawing applications.
These kinds of carbide disc cutters are specially manufactured for cutting off and slotting
metal materials such as plain steel, chilled steel, aluminum and copper as well as difficult-to-machine materials such as stainless steel, titanium alloys and printed circuit board.
Our tungsten carbide disc cutters are precision made to a high standard, with specially
ground finish and tooth. Compared with the high speed steel saw, it can perform high
speed cutting, with a high machining efficiency, accurate slitting and good surface finish.
Applications:
Tungsten carbide disc cutter is suitable for semifinishing the chilled cast iron, nonferrous
metal and its alloy. It is also suitable for semifinishing and finishing the hardened steel
and alloy steel.
Grade and Applications:
<
| Grade |
Density g/cm3 |
T.R.S MPα |
Hardness HRA |
Properties & Applications |
Approx Grades in China |
ISO |
| SH6A | 14.9 | 1850 | 92 |
Fine grain alloy, good wear resistance. It is suitable for semifinishing the chilled cast iron, nonferrous metal and its alloy. It is also suitable for semifinishing and finishing the hardened steel and alloy steel. |
YG6A | K10 |
| SH10A | 14.8 | 2450 | 90.5 |
High wear resistance and bending strength, suitable for disc cutters in electronics industry. |
_ | K20-K30 |
| SH25 | 14.8 | 2200 | 89.5 |
Higher strength, impact and shock resistance than SH6A, but lower in wear resistance and cutting speed. It is suitable for rough machi ning cast iron, nonferrous metal and its alloy as well as non metallic materials at low cutting speed. |
YG8 | K20 |
| SH30 | 14.7 | 2320 | 89.5 |
Higher strength, impact and shock resistance than SH25, but lower in wear resistance and cutting speed. It is suitable for rough machining cast iron, nonferrous metal and its alloy as well as non metallic materials at low cutting speed. |
YG8 | K20 |
| SH35 | 14.5 | 2200 | 91 |
Fine grain alloy, with good wear resistance. It is suitable for machining hard wood, plywood,PCB, PVC and metals. |
YG10X | K10-K20 |
| SH40 | 14.5 | 2480 | 92 |
Fine grade alloy, with high wear resistance, bending strength, bonding resistance and thermal strength. It is suitable for machining plywood, PCB, PVC, refractory alloys, stainless steel and high manganese steel, etc. |
YS2T | K10-K20 |
| SH50 | 14.3 | 2420 | 90 |
Moderate wear resistance and bending strength,&nbs
Zhuzhou Mingri Cemented Carbide Co., Ltd. [China (Mainland)]
Business Type:Manufacturer |
